Best picks

9 Best Rated Submersible Sump Pumps (November 2026)

Updated on · By the Floods Be Gone team

The best best rated submersible sump pumps for basements include the Zoeller M98 Flow-Mate 1/2 HP Cast Iron Sump Pump for most basements, the Zoeller M53 Mighty-Mate 1/3 HP Sump Pump for small pits and lighter water, and the 6699 1/6HP Portable Utility Pump Submersible Small for portable water removal.

On this page (8 sections)
  1. The best rated submersible sump pumps for every basement job
  2. How these submersible sump pumps compare side by side
  3. How we compared these pumps
  4. Which horsepower do you need for your water load?
  5. Which float switch works in a narrow sump pit?
  6. Should you pick a permanent sump pump or a portable utility pump?
  7. What else should you check before you buy a sump pump?
  8. The verdict on the best rated submersible sump pumps

The best rated submersible sump pump for most basements is the Zoeller M98 Flow-Mate 1/2 HP, because its oil-filled cast iron motor handles heat, its vortex impeller resists clogging, and its LED power plug lets you check the supply without lifting the lid. Pick the Wayne CDU980E if storms send water into your pit fast, or the Zoeller M53 for a narrow pit and lighter seepage.

A pump's rating means little without a match to your basement. A 1/6 HP utility pump that drains a hot tub well is a poor fit for a pit that fills during a downpour, and a 3/4 HP storm pump is overkill for a trickle along one wall.

Our comparison weighs horsepower against real lift height, checks how each float switch works, and looks at what each pump is built to move. If you are still deciding on pump type, our guide to pedestal vs submersible sump pump lays out the differences before you spend.

Our picks at a glance

  1. 1 Zoeller M98 Flow-Mate 1/2 HP Cast Iron Sump Pump
    Best for most basements

    Zoeller M98 Flow-Mate 1/2 HP Cast Iron Sump Pump

    9.3/10 our score

    See it on Amazon
  2. 2 Zoeller M53 Mighty-Mate 1/3 HP Sump Pump
    Best for small pits and lighter water

    Zoeller M53 Mighty-Mate 1/3 HP Sump Pump

    9.2/10 our score

    See it on Amazon
  3. 3 6699 1/6HP Portable Utility Pump Submersible Small
    Best for portable water removal

    6699 1/6HP Portable Utility Pump Submersible Small

    9.1/10 our score

    See it on Amazon
  1. 4Wayne CDU980E 3/4 HP Cast Iron Sump PumpCheck it
  2. 5Wayne CDU790 1/3 HP Sump Pump

    Wayne CDU790 1/3 HP Sump Pump

    Best for easy replacement installs
    Check it
  3. 6Limodot Sump Pump Submersible With 25Ft. Hose

    Limodot Sump Pump Submersible With 25Ft. Hose

    Best for long reach and hose included
    Check it
  4. 7Lanchez Sump Pump

    Lanchez Sump Pump

    Best for draining pools and hot tubs
    Check it
  5. 8Liberty Pumps 237 1/3 HP Sump Pump

    Liberty Pumps 237 1/3 HP Sump Pump

    Best for pits with small solids
    Check it
  6. 9Acquaer 1/3 HP Automatic Sump Pump

    Acquaer 1/3 HP Automatic Sump Pump

    Best for tight budgets and light duty
    Check it

The best rated submersible sump pumps for every basement job

The Zoeller M98 is the top pick overall for a permanent basement pit, while the rest of the list covers heavier storms, narrow pits, portable draining and tighter budgets. Choose by the water you actually see in the pit, not by the biggest horsepower number.

1

Zoeller M98 Flow-Mate 1/2 HP Cast Iron Sump Pump: Best for most basements

Zoeller M98 Flow-Mate 1/2 HP Cast Iron Sump Pump, best rated submersible sump pumps for basements
9.3/10Our score
  • 1/2 HP oil-filled motor in cast iron
  • Built-in snap action float switch
  • Vortex impeller for solids
  • LED power plug and 9 ft cord
  • Factory tested in water

A cast iron 1/2 HP pump with an oil-filled motor and a vortex impeller. The LED plug lets you confirm power at a glance.

See it on Amazon

Pros

  • Cast iron housing sheds motor heat
  • Vortex impeller resists clogging
  • LED plug shows power at a glance
  • Stainless hardware and float guard

Cons

  • Heavier than plastic-body pumps
  • A 1/2 HP pump needs a matching pit and discharge

The M98 suits a basement where the pump runs through wet seasons and has to clear debris that collects in the pit. Its 1/2 HP oil-filled motor sits inside a cast iron housing that pulls heat away from the windings.

That matters because the pump runs while submerged, where air cooling is limited. The non-clogging vortex impeller passes solids instead of grinding them, so gravel and leaves are less likely to jam the pump.

Zoeller rates the pump at up to 4320 gallons per hour, which is about 72 gpm, and gives it 23 ft of maximum lifting height. The LED plug is the small feature that earns its place.

You look at the plug, see the light, and know the outlet has power. A dead outlet is a common reason a working pump does not start.

Buy it for a permanent basement pit with steady water. The trade-off is weight and size: 14.1 kg of cast iron needs a solid lid and a discharge line that matches its 1/2 HP output.

Zoeller M98 Flow-Mate 1/2 HP Cast Iron Sump PumpCheck it on Amazon
2

Zoeller M53 Mighty-Mate 1/3 HP Sump Pump: Best for small pits and lighter water

Zoeller M53 Mighty-Mate 1/3 HP Sump Pump, best rated submersible sump pumps for basements
9.2/10Our score
  • 1/3 HP oil-filled motor
  • Cast iron switch case and housing
  • Vortex impeller
  • LED power plug and 9 ft cord
  • Factory tested in water

The smaller sibling of the M98, built for lighter water loads and narrower sump pits. Cast iron parts and a vortex impeller keep it dependable.

See it on Amazon

Pros

  • Fits narrower pits than larger pumps
  • Cast iron motor and switch housing
  • Vortex impeller handles solids
  • LED plug shows power at a glance

Cons

  • Less lift than 1/2 HP models
  • Not built for the heaviest storm loads

The M53 is the pump to choose when your pit is narrow or your water load is modest. At 1/3 HP it moves less water than the M98, but it carries the same cast iron motor and switch housing, the same vortex impeller and the same LED plug.

Its maximum lifting height is 19.25 ft, so it suits a basement that discharges near the rim joist rather than up a long vertical run. The 9 ft cord gives a little slack at the outlet.

Think of it as the everyday pump for a home on a lot that stays fairly dry. It handles routine seepage and the occasional wet week without strain, and at 21 lb one person can lower it into the pit.

Buy it for a small pit and lighter water. The trade-off is capacity: in a storm that sends water into the pit faster than 1/3 HP can move it, the M98 or a 1/2 HP pump is the better fit.

For a deeper look at how pump type affects the decision, read what is a pedestal sump pump.

Zoeller M53 Mighty-Mate 1/3 HP Sump PumpCheck it on Amazon
3

6699 1/6HP Portable Utility Pump Submersible Small: Best for portable water removal

6699 1/6HP Portable Utility Pump Submersible Small, best rated submersible sump pumps for basements
9.1/10Our score
  • 1/6 HP motor with thermal overload protection
  • Manual plug-in operation
  • Removes water down to 1/12 in
  • Screened inlet
  • 10 ft cord

A small, light pump for draining clean water from a basement, pool cover or water heater area. It runs when you plug it in and needs no float switch.

See it on Amazon

Pros

  • Light at 5.9 lb and easy to store
  • Low suction down to 1/12 in
  • Runs on a simple plug-in
  • Comes with garden hose and PVC adapters

Cons

  • Clean water only, not dirty water
  • Manual operation needs someone present
  • Lowest flow in this group

The 6699 utility pump is for water you can see and reach, not water that arrives while you are asleep. Its 1/6 HP motor plugs in and runs until you unplug it, so there is no float to set.

It drains water down to 1/12 in from the floor, which makes it useful after a washer hose lets go or a pool cover fills. Flow is modest at 18 gpm, and the maximum lift is 16.5 ft.

The screened inlet stops larger solids from entering, and the pump is not meant for dirty water. Two adapters come in the box: GHT 3/4 in for a garden hose and 1 in for a lay-flat PVC hose.

At 5.9 lb and 8.3 in tall, it stores on a shelf. The 10 ft cord reaches most basement outlets from a wet spot.

Buy it for portable draining and cleanup. The trade-off is that it cannot protect an empty house, because a permanent pit needs a float switch.

Our sump pump vs sewage ejector pump guide helps if your water carries waste rather than seepage.

6699 1/6HP Portable Utility Pump Submersible SmallCheck it on Amazon
4

Wayne CDU980E 3/4 HP Cast Iron Sump Pump: Best for heavy storm water

Wayne CDU980E 3/4 HP Cast Iron Sump Pump, best rated submersible sump pumps for basements
9.0/10Our score
  • 3/4 HP motor moving up to 5,490 GPH
  • Cast iron and stainless steel body
  • Integrated vertical float switch
  • Top suction anti-airlock design
  • 5-year warranty

The highest-flow pump here, made for basements that see fast water rise during storms. Its vertical float fits narrow pits and the top suction design reduces clogging.

See it on Amazon

Pros

  • Highest flow in this roundup
  • Vertical float fits narrow pits
  • Cast iron and stainless steel build
  • 5-year manufacturer warranty

Cons

  • Needs an 11 in or larger pit
  • Bigger motor draws more power

The CDU980E is the pump for basements that fill fast. Its 3/4 HP motor moves up to 5,490 gallons per hour, about 92 gpm, and the top suction design pulls water from above the bottom of the pit.

That keeps debris from clogging the intake and reduces airlock during startup. The vertical float switch fits into narrow pits where a tethered float would hit the wall.

Wayne assembles the pump in the USA and backs it with a 5-year warranty, the longest here. Cast iron and stainless steel hold up in a pit that sees grit and silt.

The pump needs an 11 in diameter or larger pit. A bigger motor also draws more current, so check the circuit that feeds the outlet.

Buy it for storm-prone basements and larger pits. The trade-off is size and power draw against the 1/2 HP M98.

Wayne CDU980E 3/4 HP Cast Iron Sump PumpCheck it on Amazon
5

Wayne CDU790 1/3 HP Sump Pump: Best for easy replacement installs

Wayne CDU790 1/3 HP Sump Pump, best rated submersible sump pumps for basements
8.8/10Our score
  • 1/3 HP motor moving up to 4,600 GPH
  • Top suction design with no weep hole needed
  • Vertical float switch tested to 1 million cycles
  • Epoxy coated steel housing
  • 3-year warranty

A popular replacement pump that goes into an existing pit without plumbing changes. The vertical float and top suction design keep it simple to set up.

See it on Amazon

Pros

  • Installs in about 15 minutes
  • Top suction resists airlock and clogging
  • Vertical float tested to 1 million cycles
  • Carry handle for lifting

Cons

  • Needs an 11 in or larger pit
  • Indoor use only

The CDU790 is the easy replacement pick. Wayne says it installs in about 15 minutes with no plumbing changes and no weep hole to drill, because the top suction design handles air lock on its own.

If your old pump died and you want the same footprint, this pump drops into an 11 in or larger pit. Its 1/3 HP motor moves up to 4,600 gallons per hour, and the vertical float switch is tested to 1 million cycles.

The epoxy coated steel housing and cast iron volute resist corrosion, and a carry handle makes it easier to lift out for cleaning. The 3-year warranty is shorter than the CDU980E's 5 years.

The pump is rated for indoor use only. Buy it for a quick swap in an existing pit.

The trade-off is lift and flow against the 3/4 HP model: 20 ft of head and 63 gpm suit typical seepage but not a fast storm surge. Pair it with a battery backup if outages are common in your area.

Wayne CDU790 1/3 HP Sump PumpCheck it on Amazon
6

Limodot Sump Pump Submersible With 25Ft. Hose: Best for long reach and hose included

Limodot Sump Pump Submersible With 25Ft. Hose, best rated submersible sump pumps for basements
8.5/10Our score
  • 1.5 HP motor moving up to 4,000 GPH
  • 25 ft power cord and 25 ft discharge hose
  • Low suction to 1/5 in
  • Thermal overload protector
  • Weighs 10.8 lb

A high-lift portable pump with a 25 ft cord and a 25 ft hose in the box. Suited to draining flooded areas where the outlet is far from the water.

See it on Amazon

Pros

  • Long 25 ft cord and hose included
  • Highest lift here at 31 ft
  • Light at 10.8 lb
  • Thermal overload protection

Cons

  • Large motor for a permanent sump pit
  • Suited to clean or slightly dirty water

The Limodot pump is built for reach. Its 25 ft power cord and 25 ft discharge hose mean you can drop it in a flooded corner and run the outlet end to a floor drain or doorway without extension cords.

The 1.5 HP motor moves up to 4,000 gallons per hour at 5 ft and lifts water up to 31 ft. Low suction reaches water as shallow as 1/5 in, so it clears a floor rather than leaving a film behind.

The thermoplastic body resists corrosion and the motor has a thermal overload protector. At 10.8 lb it is light enough to carry up stairs.

The pump is suited to pools, ponds, basements and water transfer. Its size and power make it a poor fit for a small permanent sump pit.

Buy it for long runs and portable flood cleanup. The trade-off is that it works best with clean or slightly dirty water, and a dedicated sump pump with a float is the better choice for automatic basement protection.

Limodot Sump Pump Submersible With 25Ft. HoseCheck it on Amazon
7

Lanchez Sump Pump: Best for draining pools and hot tubs

Lanchez Sump Pump, best rated submersible sump pumps for basements
8.1/10Our score
  • 1/2 HP oil-filled motor
  • Up to 2,450 GPH and 31 ft lift
  • Side inlet with metal filter
  • Low suction to 1/5 in
  • 10 ft cord

A portable thermoplastic pump for pool covers, hot tubs, ponds and shallow flooded spots. The oil-filled motor and debris filter keep it running through a long drain.

See it on Amazon

Pros

  • Oil-filled motor for longer runs
  • Lifts water up to 31 ft
  • Side inlet filter blocks debris
  • Light at 9.4 lb

Cons

  • Modest flow for a 1/2 HP pump
  • Not built for a permanent basement sump

The Lanchez pump suits hot tubs, pools, ponds and shallow flooded spots. Its oil-filled 1/2 HP motor handles longer drain sessions without overheating, and the side inlet with a metal filter keeps debris out of the pump.

Flow reaches 2,450 gallons per hour and lift reaches 31 ft. Low suction takes water down to 1/5 in.

The 10 ft cord gives some reach, and two adapters fit a garden hose or a 1-1/4 in NPT fitting. It runs until the water drops below its cut-off level.

At 9.4 lb and 14.4 in tall, it moves easily between jobs. It is built as a portable transfer pump, not a permanent sump pump.

Buy it for pool and hot tub draining. The trade-off is flow: 38.35 gpm is modest for a 1/2 HP motor, so a large pool takes time.

Lanchez Sump PumpCheck it on Amazon
8

Liberty Pumps 237 1/3 HP Sump Pump: Best for pits with small solids

Liberty Pumps 237 1/3 HP Sump Pump, best rated submersible sump pumps for basements
8.0/10Our score
  • 1/3 HP submersible pump
  • Vortex impeller for clog resistance
  • Vertical magnetic float switch
  • Handles 3/8 in solids
  • 1-1/2 in discharge

A 1/3 HP pump with a magnetic float and a vortex impeller that passes 3/8 in solids. It suits pits where grit and small debris show up in the water.

See it on Amazon

Pros

  • Passes 3/8 in solids
  • Magnetic float switch
  • Aluminum housing with cooling fins
  • 2-year warranty

Cons

  • Lower flow than the top picks
  • Needs a pit at least 10 in in diameter

The Liberty 237 suits a pit where grit and small solids show up in the water. Its vortex impeller passes 3/8 in solids, and the vertical magnetic float switch runs the pump automatically without a swinging arm.

The deep-finned aluminum housing helps the motor run cool. Flow is 44 gpm, and maximum lift is 21 ft.

The 1-1/2 in discharge fits standard sump basins, and the pump needs a pit at least 10 in in diameter. Liberty covers it with a 2-year warranty.

This is a solid middle pick for a basement with ordinary seepage and some debris. It does not match the flow of the Wayne or Zoeller pumps above.

Buy it for pits with small solids and standard basins. The trade-off is lower flow and a shorter warranty than the top three picks.

Liberty Pumps 237 1/3 HP Sump PumpCheck it on Amazon
9

Acquaer 1/3 HP Automatic Sump Pump: Best for tight budgets and light duty

Acquaer 1/3 HP Automatic Sump Pump, best rated submersible sump pumps for basements
7.4/10Our score
  • 1/3 HP motor moving up to 2,160 GPH
  • Smart electronic sensor switches on at 1-1/2 in
  • Removes water to 1/4 in
  • Thermal control core
  • 10 ft cord

A low-cost automatic pump with an electronic water sensor rather than a float. It suits light basement seepage and small drainage jobs.

See it on Amazon

Pros

  • Lowest-cost automatic pump here
  • Electronic on/off sensor
  • Strainer base cleans without tools
  • 3-year warranty

Cons

  • Lowest flow among the automatic pumps
  • Indoor and light-duty use only

The Acquaer 1/3 HP pump is the light-duty automatic option. Its electronic sensor turns the pump on when water reaches 1-1/2 in and off when it falls below 1/4 in.

That removes the float arm, so the pump fits tighter spots. Among the automatic pumps here, it has the lowest flow.

The thermal control core protects the motor if it runs dry. A strainer base filters debris and lifts off without tools for cleaning.

The pump comes with a 3/4 in garden hose adapter with a check valve and a 10 ft cord. Use it for small drainage jobs and light seepage, not for a storm that fills the pit quickly.

Buy it for a tight budget and light duty. The trade-off is capacity and lift.

If your basement sees fast water rise, spend more on the M98 or the CDU980E.

For the difference between pump types in a basement, the pedestal vs submersible comparison is a useful next read.

Acquaer 1/3 HP Automatic Sump PumpCheck it on Amazon

How these submersible sump pumps compare side by side

Flow, lift and pit size separate these pumps more than horsepower alone. The table lines up the numbers so you can match a pump to your pit and discharge run.

ProductBest forHorsepowerFlow rateMax headOur score
Zoeller M98 Flow-Mate 1/2 HP Cast Iron Sump Pumpmost basements1/2 HP72 gpm23 ft9.3
Zoeller M53 Mighty-Mate 1/3 HP Sump Pumpsmall pits and lighter water1/3 HP19.25 ft9.2
6699 1/6HP Portable Utility Pump Submersible Smallportable water removal1/6 HP18 gpm16.5 ft9.1
Wayne CDU980E 3/4 HP Cast Iron Sump Pumpheavy storm water3/4 HP92 gpmnot published9.0
Wayne CDU790 1/3 HP Sump Pumpeasy replacement installs1/3 HP63 gpm20 ft8.8
Limodot Sump Pump Submersible With 25Ft. Hoselong reach and hose included1.5 HP66.66 gpm31 ft8.5
Lanchez Sump Pumpdraining pools and hot tubs1/2 HP38.35 gpm31 ft8.1
Liberty Pumps 237 1/3 HP Sump Pumppits with small solids1/3 HP44 gpm21 ft8.0
Acquaer 1/3 HP Automatic Sump Pumptight budgets and light duty1/3 HPnot published7.4

How we compared these pumps

We compared the best rated submersible sump pumps by matching each pump's specs to the job it does best. Flow rate in gallons per minute and maximum lifting height came first, because those two numbers decide whether a pump can keep up with your water and your discharge run, and horsepower alone tells you less than the flow at your actual lift.

Next we looked at the motor and housing. Oil-filled motors in cast iron housings handle heat better than plastic-bodied pumps in daily sump duty, while vortex impellers pass solids and top suction designs reduce airlock.

Switch type decided a lot of the ranking. A vertical float fits narrow pits, while a tethered float needs room to swing, and electronic sensors remove the float arm entirely but depend on the sensor staying clean.

Each type has a place, and we matched it to the pit sizes the pumps are built for. Warranty length and indoor or outdoor rating rounded out the comparison.

Scores weigh specs, features and how well each pump fits the buyer shopping for basement protection. We did not test these pumps in a basement, and no product here earns a score on brand name alone.

Which horsepower do you need for your water load?

Horsepower should follow the water you see, not the biggest number on the shelf. A 1/3 HP pump handles routine seepage in most basements, while 1/2 HP and 3/4 HP models earn their place when storms send water in fast.

When a 1/3 HP pump is enough

A 1/3 HP pump like the Zoeller M53 or Wayne CDU790 moves about 60 to 63 gpm. That suits a basement where water seeps in slowly and the pit takes time to refill.

These pumps also fit narrower pits and draw less current. For a home on a well-drained lot, a 1/3 HP pump is the sensible choice.

When to move up to 1/2 HP or 3/4 HP

Choose 1/2 HP or more when your pit fills quickly during storms or your discharge line runs high. The Zoeller M98 moves 72 gpm and the Wayne CDU980E moves 92 gpm.

A larger motor clears the pit faster and runs less often. The trade-off is a bigger draw on the circuit and a heavier pump to lift out for cleaning.

Which float switch works in a narrow sump pit?

A vertical float switch fits a narrow pit best, because it rises straight up without swinging into the wall. Tethered floats need a wider pit so the float can move freely, and electronic sensors avoid the arm altogether but depend on the sensor staying clear of debris.

Vertical float switches

The Wayne CDU980E and CDU790 use vertical floats. They fit pits 11 in in diameter or larger and keep the pump's automatic cycle steady.

The Liberty 237 uses a vertical magnetic float that needs a pit at least 10 in across. If your pit is tight against a wall, these are the switches to look for.

Tethered floats and electronic sensors

A tethered float hangs on a cord and rises with the water. It needs room to swing and works well in wider pits.

The Zoeller M98 and M53 use a snap action float with a guard to keep it from catching. The Acquaer uses an electronic sensor that turns on at 1-1/2 in of water, so keep the sensor and strainer clean or the pump may not cycle correctly.

Should you pick a permanent sump pump or a portable utility pump?

A permanent sump pump with a float switch is the right choice for automatic basement protection. A portable utility pump is better for draining a pool cover, a hot tub or a one-time flooded spot where you can be present.

Permanent submersible sump pumps

The Zoeller M98, Zoeller M53, Wayne CDU980E, Wayne CDU790 and Liberty 237 are built to sit in a pit and run on their own. They have float switches and discharge fittings sized for a sump basin.

Pick one of these if your goal is to keep the basement dry while you are away or asleep. Add a backup pump or alarm for outages.

Portable utility pumps

The 6699, Limodot, Lanchez and Acquaer pumps are for jobs you start and finish. They plug in and run until you unplug them or the water drops to their cut-off point.

They suit cleanup and transfer work. Some, like the Acquaer, add an automatic sensor.

None replaces a float-switched sump pump for unattended protection.

What else should you check before you buy a sump pump?

Check the pit diameter, the discharge height and the outlet circuit before you order. These three details decide whether a pump fits and whether it can move water to where it needs to go.

Pit size and float clearance

Measure the inside of your pit across the top. The Wayne pumps need 11 in or more, and the Liberty 237 needs at least 10 in.

A float that touches the pit wall can stick and stop the pump. Leave clearance around the float and keep the lid clear of the switch arm.

Discharge height and check valve

Add up the vertical rise from the pit to the discharge point. A pump rated for 23 ft of lift, like the M98, handles a taller run than the M53 at 19.25 ft.

Fit a check valve so water does not drain back into the pit and restart the pump. Match the discharge pipe to the pump's outlet size.

Power supply and backup

A sump pump only works while the outlet has power. The Zoeller pumps have an LED plug so you can see the supply at a glance.

During outages, a battery backup pump keeps the pit clear. If storms often cut power in your area, budget for a backup before you spend more on horsepower.

The verdict on the best rated submersible sump pumps

For most basements, the Zoeller M98 Flow-Mate 1/2 HP is the pump to buy. It pairs a heat-shedding cast iron motor with a vortex impeller and an LED plug that makes a power check easy, and it is the best rated submersible sump pump here for daily basement duty.

Pick the Wayne CDU980E if storms fill your pit fast and you have an 11 in or larger basin. Choose the Zoeller M53 for a narrow pit and lighter seepage, or the Wayne CDU790 for a quick swap into an existing pit.

For portable cleanup, the 6699 or the Limodot with its 25 ft hose does the job without a float to set. Before you buy, measure your pit and count the vertical feet on your discharge run, because those two numbers turn this list into a single clear choice.

Our top 3 picks at a glance

  1. 1 Zoeller M98 Flow-Mate 1/2 HP Cast Iron Sump Pump
    Best for most basements

    Zoeller M98 Flow-Mate 1/2 HP Cast Iron Sump Pump

    9.3/10 our score

    See it on Amazon
  2. 2 Zoeller M53 Mighty-Mate 1/3 HP Sump Pump
    Best for small pits and lighter water

    Zoeller M53 Mighty-Mate 1/3 HP Sump Pump

    9.2/10 our score

    See it on Amazon
  3. 3 6699 1/6HP Portable Utility Pump Submersible Small
    Best for portable water removal

    6699 1/6HP Portable Utility Pump Submersible Small

    9.1/10 our score

    See it on Amazon

Frequently asked questions

How do I size a submersible sump pump for my basement?

Match horsepower and flow to your water load and lift. A 1/3 HP pump handles typical seepage in most homes, while a 1/2 HP or 3/4 HP pump moves storm water faster.

Add height to your discharge run when comparing flow figures.

Does a submersible sump pump need a check valve?

Yes. A check valve on the discharge line stops water from draining back into the pit after each cycle, so the pump does not restart on the same water.

Fit it above the pit and keep it clear of the float.

Can I put a utility pump in my basement sump pit permanently?

Only if the pump is built for automatic sump duty. Utility pumps like the 6699 and Lanchez run when plugged in and need someone present.

A pump with a float switch runs on its own when water rises.

What size sump pit fits these pumps?

The Wayne CDU980E and CDU790 need an 11 in or larger pit. The Liberty 237 needs at least 10 in.

Check your pit's inner diameter before ordering, and keep the float free to move without touching the wall.

How long do submersible sump pumps last?

Warranty terms here run from 2 to 5 years. Cast iron and oil-filled motors handle heat better than plastic bodies in daily use.

Plan to replace the pump when cycles get longer or the motor sounds different.